Sharp estimates in terms of moduli of smoothness for compound cubature rules

Summary In 1980 Dahmen-DeVore-Scherer introduced a modulus of continuity which turns out to reflect invariance properties of compound cubature rules effectively. Accordingly, sharp error bounds are derived, the existence of relevant counterexamples being a consequence of a quantitative resonance principle, established previously.     

含铱配合物的聚对苯类电磷光聚合物

通过Suzuki聚合法合成了以聚对苯为主链的含铱配合物的电磷光共轭聚合物。部分苯环单元被β-二酮结尾的烷氧基链取代,进而与2-苯基吡啶配位形成悬垂的铱配合物侧链。宽带隙的聚对苯主链使主体与客体的能级匹配,从而有利于能量的转移。铱配合物通过长β-二酮结尾的烷氧基链悬挂在聚对苯的侧链上提高了聚合物的溶解性,有利于器件的制作。另外,由于连在氧原子上的β-二酮具有较大的旋转自由度,增大了β-二酮的反应活性有利于配位反应的进行。聚合物的EL光谱只显示客体铱配合物的发射,主体的发射已被完全猝灭。这表明聚合物主体和铱配合物客体之间发生了有效的能量转移。PPPIrPPy2聚合物发光器件的EL光谱发光波长为525nm,最大外量子效率为2.6%。     

SN方法粒子输运计算程序自动建模关键技术问题研究

在充分调研和分析SN方法粒子输运计算程序自动建模方法的基础上，对建模过程中的模型文件格式识别、属性编辑、空腔处理及自动划分离散网格等关键技术问题进行了研究，并提出了合理可行的解决方法。通过对SNAM程序建模部分功能测试，验证了这些方法的正确性和有效性。This paper presents two approaches to enhance the geometry modeling ability of SN particle transport simulation codes and focus on the key issues that lie in the processing from CAD model to SN code geometry model, e.g. CAD file format support, void modeling, mesh generation and model-editing. SNAM （SN Automatic Modeling system） has been developed as an interface code between commercial CAD software and SN particle transport simmulation codes. The testing results have shown that the algorithm and implementation used in SNAM are efficient and capable of all the necessary processing from CAD model to SN geometry model.     

A comparative study of the structure and crystallization of bulk metallic amorphous rod Pr60Ni30Al10 and melt-spun metallic amorphous ribbon Al87Ni10Pr3

Pr-based bulk metallic amorphous （BMA） rods （Pr60Ni30Al10） and Al-based amorphous ribbons （Al87Ni10Pr3） have been prepared by using copper mould casting and single roller melt-spun techniques, respectively. Thermal parameters deduced from differential scanning calorimeter （DSC） indicate that the glass-forming ability （GFA） of Pr60Ni30Al10 BMA rod is far higher than that of Al87Ni10Pr3 ribbon. A comparative study about the differences in structure between the two kinds of glass-forming alloys, superheated viscosity and crystallization are also made. Compared with the amorphous alloy Al87Ni10Pr3, the BMA alloy Pr60Ni30Al10 shows high thermal stability and large viscosity, small diffusivity at the same superheated temperatures. The results of x-Ray diffraction （XRD） and transmission electron microscope （TEM） show the pronounced difference in structure between the two amorphous alloys. Together with crystallization results, the main structure compositions of the amorphous samples are confirmed. It seems that the higher the GFA, the more topological type clusters in the Pr-Ni-Al amorphous alloys, the GFAs of the present glass-forming alloys are closely related to their structures.     

一种基于GIS的选址问题及算法

本文考虑了选址区域内存在地理阻断情况下的一种基于GIS的选址问题.对单配送中心选址模型,以GIS返回的任意两点间的最短可行路径的长度作为修正距离函数,分析了目标函数在凸形选址区域上非凸非连续的性质.进一步,采用给出了一种近似搜索算法并通过一个实例计算与重心法进行了比较.     

Linear EV model with replicate observations on independent variables

This paper studies the linear EV model when replicate observations are made only on independent variables. We construct the estimates of regression coefficients and prove the consistency and asymptotic normality under some proper conditions. Results obtained reveal the difference between the case where the independent and dependent variables are observed repeatedly and simultaneously and the case studied in this article.     

Electron spin resonance of diluted solid solutions of MnO2 in Y2O3

Electron spin resonance spectra of Mn²⁺ in diluted solid solutions of MnO₂ in Y₂O₃ have been studied at room temperature for Mn concentrations between 0.20 and 2.00 mol%. Isolated Mn²⁺ ions in sites with two different symmetries were observed, as well as Mn²⁺ ions coupled by the exchange interaction. The relative concentration of isolated to coupled Mn²⁺ ions decreases with increasing manganese concentration. The results are consistent with the assumption that the manganese ions occupy preferentially the C₂ symmetry sites. A theoretical calculation based on this model yields an effective range of the exchange interaction between Mn²⁺ ions of 0.53 nm, of the same order as that of Mn²⁺ ions in CaO.     

CsI(Tl)晶体中反冲Cs和I核Quenching?Factor的测量

许多实验对用CsI(Tl)闪烁晶体作为探测器来寻找和探测暗物质的可行性进行了研究.本工作利用8MeV单能中子轰击CsI(Tl)晶体探测器来研究Cs核和I核的QuenchingFactor.在数据处理中,运用脉冲形状甄别(PSD)方法来分辨反冲核信号和本底信号.实验结果表明,在7keV到132keV的能区中,Quench ingFactor随着反冲核能量的减少而增加.在探测暗物质的实验中,这一性质对于CsI(Tl)晶体探测器获得较低的能量阈值是很有利的.     

静态球对称黑洞Dirac场的统计熵

利用改进的brickwall模型,给出了一类静态球对称黑洞Dirac场的熵,结果表明,在取相同的截断因子时,Dirac场的熵均为标量场的熵的72倍 关键词： 黑洞 统计熵 brickwall模型 Dirac场     

行波型热声发动机的分布参数法热力分析

在现有热声网络模型的基础上 ,对行波型热声发动机采用分布参数法进行了详细地分析 ,得到了较为完整的分布参数法网络模型 ,并给出了该模型的定性关系式 ,所得结果与采用集总参数法的结果有很大差异。分析表明 ,分布参数法更适合于一般的系统情况 ,集总参数法仅仅在一定条件下才适用。文中对一个实际系统应用分布参数法进行了分析 ,得到一些结论 ,对于我们设计行波型热声发动机有非常重要的理论指导意义